Cambridge-audio AP26149/1 Manuel d'utilisateur télécharger pdf (Page 2)

650BDazur

ENGLISH

The “Video Setup” section of the Setup Menu system allows you to

congure various video output options. The menu items in this section

are:

Menus Settings

Picture Adjustment ...................................... Brightness

Contrast

Hue

Saturation

Sharpness

Primary Output ............................................ HDMI

Component

TV Aspect Ratio ........................................... 4:3 Letterbox

4:3 Pan & Scan

16:9 Wide

16:9 Wide/Auto

TV System .................................................... PAL (default)

NTSC

Multi-system

Output Resolution ....................................... Auto

1080p

1080i

720p

480p/576p

480i/576i

Source Direct

1080p24 Output ......................................... Auto

Off (default)

Color Space ................................................. Auto

RGB Video Level

RGB Limited

YCbCr 4:4:4

YCbCr 4:4:2

HDMI Deep Color ......................................... 30 Bits

36 Bits

Off

Display Options............................................ Subtitle Shift

OSD Position

OSD Mode

Normal

Silent

Remaining

Angle Mark

Off

PIP Mark

Off

SAP Mark

Off

Screen Saver

Off

Energy Saver

1. Picture Adjustment

This is used to adjust picture control parameters. The 650BD provides a

wide array of picture controls. Please refer to the “Picture Adjustment”

section of this manual for details of each control.

2. Primary Output

To select the primary video output method. The options are:

HDMI – Use HDMI as the primary video output. This setting will ensure

that the HDMI output gets the best possible picture quality. Component

and composite video output may not be available or may be limited to a

lower resolution based on content source limitations.

Component – Use component video as the primary video output. This

setting will ensure that the component output will always be available

and displays proper video signals. With this conguration, the video

decoder in the player performs any necessary format conversion.

Note: Copyright control mechanisms encoded on the disc may limit

the output resolution of the component video output. For DVD, if CSS

encryption is in use the output resolution is limited to no more than

480p/576p; for Blu-ray Discs, the output resolution is limited to no more

than 1080i, and could be lower if the disc contains an Image Constraint

Token.

3. TV Aspect Ratio

To set the aspect ratio of the player’s output image. The options are :

4:3 Letterbox – Choose this when the display is standard 4:3. A

widescreen image is displayed in “letterbox” format with black borders

on top and bottom.

4:3 Pan & Scan – Choose this when the display is standard 4:3. A

widescreen image will be stretched.

16:9 Wide – Choose this when the display is widescreen 16:9. 16:9

materials will be displayed in its native aspect ratio, and 4:3 materials

will be stretched horizontally.

16:9 Wide/Auto – Choose this when the display is widescreen 16:9.

16:9 materials will be displayed in its native aspect ratio, and 4:3

materials will be displayed with black borders on both sides in order to

maintain the original 4:3 aspect ratio.

4. TV System

To choose the output video standard (PAL/NTSC) to match your TV. The

options are:

PAL – When playing PAL-encoded discs, no system conversion is

performed. NTSC-encoded contents are converted to PAL output. Blu-ray

discs encoded with 24Hz frame rate are converted to 50Hz frame rate if

neither 1080p24 Output nor Source Direct output resolution is enabled.

NTSC – When playing NTSC-encoded discs, no system conversion is

performed. PAL encoded contents are converted to NTSC output. Blu-ray

discs encoded with 24Hz frame rate are converted to 60Hz frame rate if

neither 1080p24 Output nor Source Direct output resolution is enabled.

Multi-system – No system conversion is performed. The output video

system is the same as that encoded on the disc. Blu-ray discs encoded

with 24Hz frame rate are converted to 60Hz frame rate if neither

1080p24 Output nor Source Direct output resolution is enabled. This

mode requires a TV that supports both NTSC and PAL systems.

Note: Do not select “Multi-system” if your TV does not support both PAL

and NTSC systems. The TV display may become a black screen upon

inserting a disc encoded in a different system than your TV supports.

Should this happen, you can press the OPEN button to eject the disc tray,

and then use the Setup Menu to correct the “TV System” setting.

5. Output Resolution

To choose the output resolution that best matches your television’s

native resolution. For a detailed description on how to choose a proper

output resolution, please refer to the “Select the Best Output Resolution”

section of this manual.

Video setup

Color Space Auto

Brightness

1 2 3

Commentaires sur ces manuels

Pas de commentaire

Cambridge-audio AP26149/1 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Cambridge-audio AP26149/1