Cambridge Audio DVD99 Manuel d'utilisateur télécharger pdf (Page 21)

DVD99

ENGLISH

There is no power

Ensure the AC power cord is connected securely.

Ensure the plug is fully inserted into the wall socket and is switched on.

Check fuse in the mains plug or adaptor.

The player will not read the disc

Check the disc is not loaded upside down.

Check that the disc is not too scratched or dirty.

The disc type is not supported by this unit.

Functions on some discs may not work on this unit. This is not a

malfunction of the DVD player.

There is no sound

Ensure that the amplifier is set correctly.

Check that the interconnects are inserted correctly.

The disc is skipping

Check that the disc is not too scratched or dirty.

Ensure the player is on a firm surface and not subject to vibrations.

A low hum or buzz sound can be heard

Power cords or lighting placed near this product.

Analog inputs not connected securely.

No sound from the rear speakers

Source being played is not recorded in surround-sound.

A stereo mode has been selected.

No sound from the centre speaker

A stereo mode has been selected.

Remote control is not working

The batteries are flat.

The remote is too far from the unit or out of the effective range.

Files on a connected USB device do not play

If the USB drive is incompatible, or the player encounters errors while

reading the USB drive or flash memory card, the screen displays "Device

Error". In this case please verify that the USB drive is compatible, and try

to unplug the device and re-insert again.

In some cases, an incompatible USB device may cause the player to

stop responding. If this occurs simply turn off the power, remove the

USB device, and turn the player back on.

Problems using HDMI

Ensure that your screen supports HDCP (High-Definition Copy

Protection).

Ensure your screen is capable of displaying the resolution being output

by the DVD player.

Note: Cables which run over 5m may cause sync or grounding issues.

For more frequently asked questions (FAQ’s), technical advice and

information on getting the most out of your DVD99, please visit the

Support section on Cambridge Audio’s website:

www.cambridgeaudio.com/support.php

Troubleshooting

Disc types CD (CD-DA), SACD, DVD-A, DVD-V,

CD-R/RW, DVD-R/RW, DVD+R/RW,

DivX, MP4

Analog audio outputs • Stereo

• 5.1 (from DVD, DVDA and SACD

multi-channel)

• 7.1 (from DD)

Analog video outputs • Composite Video (CVBS)

• S-Video (SVHS)

• RGB/SCART

• Component (YCbCr/YPbPr)

HDMI output Scaling/Deinterlacing to

480i/p, 576i/p, 720p, 1080i/p

THD (unweighted) < 0.002% @ 1kHz

< 0.008% @ 20Hz - 20kHz

IMD (19/20kHz) 0dBFs < 0.002%

S/N ratio < -103dB

Crosstalk @1kHz < -103dB @ 1kHz

Dynamic Range > 105dB

Frequency response 5Hz - 20kHz ± 0.2dB

Jitter (correlated) < 140 psec

Composite Video 1.0V pk-pk (75 ohms)

S-Video Y: 1.0V pk-pk (75 ohms)

C: 0.286V pk-pk (75 ohms)

Component Video Y: 1.0V pk-pk (75 ohms)

Cb/Cr: 0.75V pk-pk (75 ohms)

Pb/Pr: 0.75V pk-pk (75 ohms)

Power supply 100-240V AC ~ 50/60Hz

Max power consumption 40W

Dimensions (H x W x D) 55 x 430 x 263mm

Weight 2.6kg (5.7Lbs)

Cambridge Audio’s policy is one of continuous improvement. Design and

specifications are therefore subject to change without prior notice.

Technical specifications

1 2 ... 16 17 18 19 20 21 22

Commentaires sur ces manuels

Pas de commentaire

Cambridge Audio DVD99 Manuel d'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Cambridge Audio DVD99